Product Features
Advanced Alloy Series
PA & UF Alloy Series
- Specialized for Overmolding: The PA & UF Series consists of high-performance materials specifically engineered for overmolding requirements. It is ideal for 2-shot or 3-shot injection molding with engineering plastics such as ABS, Nylon (PA), and Polycarbonate (PC).
- Superior Adhesion & Bonding: Excellent chemical bonding with Nylon and other rigid substrates ensures long-term durability without delamination. It significantly enhances both product aesthetics and slip resistance.
- Enhanced Ergonomics & Industrial Utility: This series is widely utilized in professional pneumatic and power tools. While the tool bodies are made of high-strength engineering plastics, the PA & UF Series serves as the soft-touch overmold, significantly improving grip comfort, vibration damping, and safety. Its exceptional physical properties and processing adaptability make it the ideal solution for complex multi-material bonding challenges.
- REACH (EC/1907/2006)
- RoHS (EU/2011/65)
- California Proposition 65 (Prop 65)
- Polycyclic Aromatic Hydrocarbons (PAHs) Safety Standards
物性表與詳情
PA&UF SERIES 工程塑膠黏合系列
此系列專門針對工程塑膠的二次射出 (Double-Shot Molding) 設計，能與 PA6 (尼龍)、ABS 或 PC 等硬質塑膠完美結合，常應用於電動工具或高強度產品的握把與保護層。
? 產品顏色與外觀 (Color & Appearance)
- 半透黃色 (Translucent Yellow)：PA-068
- 白色 (White)：UF-070AM、UF-060-5B
? 產品特點與應用 (Features & Applications)
適用情境： 適合應用於與一般工程塑膠射出黏合 (Suitable for bonding with general engineering plastics)
材料優勢：
- ✅ 抗老化性佳 (Great aging resistance)
- ✅ 可雙色射出成型 (Double-shot molding onto ABS, Nylon, and PC materials)
- ✅ 射出成型佳 (Great injection molding)
? 詳細規格表 (Specification Table)
| 測試項目 (Test Item) | 單位 (Unit) | PA-068 | UF-070AM | UF-060-5B | 測試規範 (Method) |
|---|---|---|---|---|---|
| 顏色 (Color) | - | 半透黃色 | 白色 | 白色 | - |
| 材料應用 (Applications) | - | 黏著 PA6 (尼龍) | 黏著 ABS/PC | 黏著 ABS/PC | - |
| 硬度 (Hardness) | Shore | 66-70A | 72-76A | 55-59A | ASTM D2240 |
| 比重 (Density) | g/cm³ | 0.91±0.02 | 1.16±0.02 | 1.10±0.02 | ASTM D297 |
| 抗張強度 (Tensile Strength) | kg/cm² | 33 ↑ | 70 ↑ | 42 ↑ | ASTM D412 |
| 延伸率 (Elongation) | % | 450 ↑ | 450 ↑ | 500 ↑ | ASTM D412 |
| 撕裂強度 (Tear Strength) | kg/cm | 22 ↑ | 35 ↑ | 30 ↑ | ASTM D624 |
| 熔融流率 (MFI) | g/10 min | 4-8E | 6-12E | 2-4E | ASTM D1238 |
| 建議加工溫度 (Temp.) | °C | 190-220°C | 170-200°C | 170-200°C | - |
? 備註與加工建議：
- 熔融流率條件：數值後方的 E 表示測試條件為 190°C / 2.16KG。
- 加工建議：
- PA-068 因需與尼龍結合，建議加工溫度較高 (190-220°C)。
- UF 系列針對 ABS/PC，溫度建議控制在 170-200°C 之間。
- 以上數據由本公司實驗室提供，試片厚度為 3 mm，僅供加工參考。
